In our proposed system a basic home automation application on Raspberry Pi, which is automatically turned ON when NFC band is within the range and turned OFF automatically when it is out of range. So home automation becomes further advantageous using the NFC band NFC-Near Field Communication is a set of the communication protocol used for exchanging the data between two devices, here it is not needed to be paired for every time. Normally, if Bluetooth is turned ON it, always looking for Nearby devices for every certain interval of time, by using this technology, when the users NFC band comes into the range, Bluetooth will identify the band, by identifying that state we just turned ON of all Home appliances. The range of the device can be configurable through the program, based on the room size. So that it will be switched at the right range either IN/OUT.